vFlow PRV

Description

[vc_row][vc_column][vc_column_text]The vFlow PRV was designed by heating engineers and displayed on the Installer INVENT stand at the Installer show 2018, the blow-off fitting is used as a means of terminating a pressure relief pipe on a wet central heating system in a safe manner.

The vFlow PRV is particularly useful when working at heights as the fittings low profile design enables the vFlow to be fitted from inside the property. There is no need to make fabrications outside the building. The vFlow is small enough at 16mm to be fitted using standard 21.5mm sleeving. Simply solder vFlow to the end of the discharge pipe and feed through sleeving/wall to the exterior where the fitting will appear small but visible.

It is cost competitive with the traditional method of swan necking the discharge pipe when considering it can be fitted quicker and with less risk to the installer.[/vc_column_text][vc_video link=”https://www.youtube.com/watch?v=KcJgYa4kXfg&feature=youtu.be” el_width=”80″ align=”center”][/vc_column][/vc_row]