Flamco Flexfiller Mini 130D – 17455


The Flamco Flexfiller Mini 130D is a digital top-up pressurisation unit.

The Flexfiller mini digital is a narrow wall mounted, low flow rate (0.4 l/min) top-up pressurisation unit with a 2 litre break tank. Ideal for large residential or small commercial application. For use on heating systems utilising a 300 litre expansion vessel or less, or chilled systems uitilising a 50 litre expansion vessel or less.


  • System volumes up to 2,600 litres
  • MODBUS communication output.
  • System quick fill mode.
  • Event logging
  • Volt free contacts
  • Electric pump,. 230V 50Hz sinbgle phase.
  • Single pump

Available on back-order

Category: Tags: , , ,


Flamco Flexfiller Mini 130D – 17455

The Flamco Flexfiller Mini 130D IS A compact wall mounted and free standing pressurisation unit. It is a fully automatic heating / chiller system topup device, offering accurate control and reliability. The Flexfiller Mini is suitable for pressure management in domestic, commercial and industrial sealed heating and cooling systems. It operates a single pumped system for topping up water using a break-tank and a digital controller. With AB type break tank for back flow protection.

Operating Conditions:
Maximum system temperature: 85 ºC.
Maximum ambient temperature: 40 ºC.
Relative humidity 95% non-condensing.
Noise Rating Data: < 75 dBA.


Suitable for membrane pressure expansion tank
Suitable for compressor-controlled automatic expansion unit
Outer pipe diameter 1 return 21.3mm
Pressure 0.5 – 3 bar
Height 480mm
Width 210mm
Depth 150mm


There are no reviews yet.

Be the first to review “Flamco Flexfiller Mini 130D – 17455”

Your email address will not be published.