Application and Dosage
When sealing leaks, relieve the water pressure before application if possible. Whilst LS-X is setting, drain system if necessary. Apply LS-X direct from the tube and mould into shape using a spatula or knife previously dipped into soapy water to prevent adhesion or dragging. Replace cap immediately after use. Allow a minimum of 1 hour to set. Time required depends on thickness applied. Spraying with water speeds curing.
Fernox LSX contains Acetoxysilane.
Colour: Milky white
Odour: Mild. Acetic
SG: 1.0 at 20°C
Packaging, Handling and Storage
Fernox LSX is supplied in 50ml tubes. Fernox LSX is classified as a skin and eye irritant. Keep out of reach of children. Avoid contact with skin. Use only in well-ventilated areas. We recommend the use of gloves with this product.