Application and Dosage
The recommended ‘in use’ concentration of the product is 0.5%. One 500ml bottle will treat an average 3 to 4 bedroom house (100 litres). For open vented systems add via the feed and expansion tank. For sealed systems add via the radiator using a Fernox Injector. In single feed indirect cylinders, e.g. “Primatic” or similar, potable water chemicals must be used. For continued protection Fernox Protector F1 levels should be checked regularly (annually). We recommend untreated or sludged systems are thoroughly cleansed and flushed in accordance with BS7593 and Benchmark using Fernox Cleaner F3/F5, before treating with Fernox Protector F1, as existing debris can damage the installation.
Protector F1 is a blend of inorganic and organic corrosion and scale inhibitors and biocide.
Odour: Aromatic (slight)
Colour: Light Yellow
pH (conc.): 8.0
pH (soln.): 7.4 to 8.2
SG: 1.1 at 20°C
Packaging, Handling and Storage
Fernox F1 is supplied in 500ml bottles. Fernox Protector F1 is classified as non-hazardous, but as with all chemicals: Keep out of reach of children. Do not mix with other chemicals. Do not take internally. May produce an allergic reaction. Contains 1,2-benzisothiazol-3(2H)-one. In case of contact with eyes or skin, rinse immediately with plenty of water.